Source: www.metro-solutions.com

Xerox was the top of the line and durable printers. From time to time, they also experience minor problems, which are quite normal during the life of a printer. When the printer problems, do not immediately contact a staff of service - check first if you can repair the problem.

Here are the steps that you can take when troubleshooting.

No power. Your printer must be securely connected to a power supply with the proper voltage and electric current meets the specifications. In addition, it is preferable if your printer does not share power with other devices that require a power supply.

Paper jams. Check the appropriate loading instructions Perhaps you have loaded several sheets at a time that the paper is folded. There are documents that cannot be used in Xerox printers some are raw documents, transparent paper and padded envelopes. Additionally, make sure the paper if it is specifically designed for ink jet or laser printer and not to defeat its purpose. The surface where the printer must be flat, otherwise it could be the reason for the jamming of paper. Also check the paper tray and shelf guides if this is in the correct position.

Unusual noise. Open the door of your printer and use a flashlight for a good blow of eye inside. Check if there are foreign objects or small insects which could have analyzed it. If there is none, check your load appropriate paper process and the surface which is your printer must be level.

Cannot print. Check if the printer is firmly connected to the computer; visually inspect the physical conditions of wires and cables used. When you use the Wi - Fi connection, make sure that the signal strength is good. In addition, check if there is an error message in the control panel.

Printer overheated. It is usually a problem with a laser printer. Make sure that the printer air vents are not blocked. You can check the manual to verify the requirements of space for the printer. Cool the printer for at least 30 minutes. You can open some of the covers of the printer so that the air can circulate more.

Poor print quality. Check if the toner or cartridge used is recommended by Xerox. Then check the paper that is used, it is perhaps still wet and need replacement. If the printer is a little old, perhaps that the transfer belt is the culprit, and should also be replaced. If all these do not work problems can be on your power supply. It is preferable that you contact Xerox support.

Some of the colors are faded. Check your toner cartridge, see if it is damaged or empty and replace.

The condensation of water vapour. Turn off the printer and unplug. Wait for the condensed water to disappear. It is recommended that you do not use your printer for at least an hour or two.

What are the problems of printer base that you can resolve and save money for repairs. However, don't be stingy not so - if the actions above do not solve the problems - call a technician.